Swap spirals and set direction (left/right rotation)
Unterschied: Links- und Rechtsdrehende Spirale
Swap spirals.
Note: It is easier if you remove the spiral thrust.
Spirals firmly anchored in the machine.
1. lock the left and right (front) clamp upwards and pull the thrust forward.
2. turn the spiral to release it through the open slot at the bottom left of the socket image.
3. pull out the spiral.
4. install new spirals according to the same principle.
5. turn until it fills the slot, then hook in and turn the spiral until it clicks. You can install any spiral in this way.
Set left-right rotation
1. it is best to pull out the thrust (see step 1). Then disconnect the cable at the rear and lift out the thrust.
The picture shows the motor of the spiral.
2. here you can see 2 connections (left and right).
3. reconnect the plug (see Fig. 1 and Fig. 3) to change the direction.